Poly V
The belt for all applications.
THE POLY V IS A POWER TRANSMISSION BELT
FEATURING MULTIPLE LONGITUDINAL RIBS.
It transmits the torque by contact of the belt rib flanks and the pulley grooves.
Its monobloc design guarantees:
- Compactness
- High power transmission
- Operating cost
Poly V belt Applications
Compactness
The Poly V has been designed with a larger contact surface area than V belts or flat belts.
THE POLY V HAS MULTIPLE APPLICATION BENEFITS:
- Improved transmission ratio is possible (Poly V 1 : 60 vs V belt 1 : 20). Does away with the need for stepped pulleys.
- Reduced diameters (diameters up to 9mm with the H profil compared to 50mm with V belts).
- Reduced belt width for a given geometry and the same power transfer.
Moreover, the Poly V can operate in flexion and counter flexion with the following benefits:
A single belt can drive several accessories: serpentine belt installation.
- Driving accessories from the back of the belt.
High output:
SMALLER CARBON FOOTPRINT:
Iso-tension and iso-geometry technical tests show that the Poly V can achieve an output several percent higher: over 98%, which can reduce energy consumption and sometime even engine size.
Reduced costs:
BENEFITS:
- Reduced diameter and pulley width.
- Reduced belt length.
- No need for inertia flywheels in some cases.
- Machining of pulleys is facilitated: the Poly V can be used on smooth pulleys (receivers).
MAINTENANCE:
Rapid set up (1 Poly V can replace up to 15 V belts).
- No need for matching.
- Increased lifespan.
OPERATING:
Reduced consumption due to high output.